Register | Login
Attackpoint - performance and training tools for orienteering athletes

Discussion: Results posted

in: Hudson Highlander 2017 (Oct 1, 2017 - Stony Point, NY, US)

Oct 3, 2017 2:49 AM # 
chinghua:
http://obasen.orientering.se/winsplits/online/en/s...

Note: Wyatt Riley's time to the first control is rather long (1300+ minutes) indicating either his level of fitness or the fact that he did not clear an errant start punch from his SI dibber. If he had taken an average time for this leg he would actually have placed 6th.

Thanks, Geof!
Advertisement  
Oct 3, 2017 3:34 AM # 
pshannon:
Don't know if its fixable at this point but if you need his time he was directly ahead of me at #1. He got me by a few seconds so I would guess 5:40 give or take a couple of seconds.
Oct 3, 2017 10:59 AM # 
jjcote:
I reckon the official start time is about 1:22 later than when we actually started, because the split for me for #1 is that much less than what I have on my watch, and the rest are ok (anf my total is of course off by that much as well). Not that it matters that much.
Oct 3, 2017 11:38 AM # 
geof:
Problem is that using OR (as we were) I don't know a way to adjust Wyatt's start time to the default time (9.00).
JJ: The difference in the start time is probably that I did not sych computer time to SI controls (as Craig had requested!).
Also because we only had one finish box (also my bad) consider any finishers with only 1 second difference to be equal e.g.Will and Boris were equal 2nd.
Oct 3, 2017 11:40 AM # 
vmeyer:
Geof, you should be able to adjust the start time in the csv file for everyone. If you would like me to, then send it my way.
Oct 3, 2017 7:36 PM # 
geof:
Val. Done thanks, but it is not only the start time it is the first leg time (say 5.40) and every control cumlative time and finish time which needs changing. I can change the cvs file to Excel and put the data into columns which would make the calculation of cumlative times trivial but i do not know how to then put the file back into cvs format with only a single column.
Oct 3, 2017 7:41 PM # 
vmeyer:
Right, I can do that. Care has to be given to keeping the times correctly formatted when going between the two formats.
Oct 3, 2017 7:47 PM # 
geof:
Someone obviously didn't think too much of Joe's first loop course. Control No. 4 was found (by Craig) yesterday with the control stand snapped in two and the SI unit a few meters away with multiple cracks! The control was about 70 mts. away from a rarely used minor (unblazed) trail. Go figure.
Oct 3, 2017 9:19 PM # 
bubo:
A simple click in the box "real times" in Winsplits will show Wyatts time when he punched #1.
Oct 3, 2017 9:46 PM # 
jjcote:
Maybe it was Eugene who vandalized control #4...
Oct 3, 2017 11:18 PM # 
vmeyer:
Good hint bubo. That would have saved me some puzzling, that's for sure. :)
Oct 4, 2017 6:30 PM # 
geof:
Winsplits updated (Thanks to Valerie.) to take account of difference between computer and SI time and to forgive Wyatt's failure to clear. If you don't think he deserves it then just move all places below 6th up one!
Oct 4, 2017 9:06 PM # 
chinghua:
Route gadget is up! Thanks vmeyer!

http://www.vmeyer.net/gadget/cgi-bin/reitti.cgi?ac...
Oct 5, 2017 12:13 AM # 
coach:
and here is the map,
HHmap2017
Oct 5, 2017 3:02 AM # 
Joe:
looks like the route gadget file is an old version of the course. the start, first control, 7, 15 and 27 are wrong.
Oct 5, 2017 11:03 AM # 
vmeyer:
Ack! Let me get that fixed.
Oct 5, 2017 12:51 PM # 
geof:
My fault, in rush to get RG out I sent old map. Corrected course maps on the way.
Oct 5, 2017 2:26 PM # 
vmeyer:
OK, take 2 on the RouteGadget. Sorry about blowing away those who had already entered their routes. Please redo.

http://www.vmeyer.net/gadget/cgi-bin/reitti.cgi?ac...

This discussion thread is closed.